$34.95 plus $12.50 us Shipping
![ScreenShot.jpg](5x7PopupLightweightBlue_files/image001.jpg)
![Fold8.jpg](5x7PopupLightweightBlue_files/image002.jpg)
This
portable screen is perfect because it holds itself open. All you need is
something to lean it against! This eliminates the need for a frame with a stand. The frame stretches the fabric automatically preventing large wrinkles, which
could create hard-to-remove shadows.
How to fold the green screen
Do not
have expensive lighting equipment, then take the screen out back and shoot in
the shade.
![backyard.jpg](5x7PopupLightweightBlue_files/image003.jpg)
Just
bring your photos into Green Screen wizard and start having fun!
![](5x7PopupLightweightBlue_files/image004.jpg)
When
you are all done, all you do is fold the screen back up, following the simple
steps below, and pop it back in the case! It does not get any easier than that!
Instructions for collapsing the screen
First
bring the screens corner to your chest.
![Fold1.jpg](5x7PopupLightweightBlue_files/image005.jpg)
Then
fold that corner over to the opposite corner.
![Fold2.jpg](5x7PopupLightweightBlue_files/image006.jpg)
Reverse
your left hand.
![Fold3.jpg](5x7PopupLightweightBlue_files/image007.jpg)
![Fold4.jpg](5x7PopupLightweightBlue_files/image008.jpg)
Then
twist your hand back around to form the circle shown.
![Fold5.jpg](5x7PopupLightweightBlue_files/image009.jpg)
Then
fold that circle under the circle formed in your right hand.
![Fold6.jpg](5x7PopupLightweightBlue_files/image010.jpg)
Then
flatten the circles into one circle.
![Fold7.jpg](5x7PopupLightweightBlue_files/image011.jpg)
Now
you're ready to put it back in the case.
![Fold8.jpg](5x7PopupLightweightBlue_files/image012.jpg)
How to use the stiffener
The
screens came all the way from China so you may need to make sure the spring in
the screen is not twisted. If you bend the screens spring out where it is bowed
in you my be happy with the using just the spring. If you feel you need a bit
of extra stiffness then use the supplied stiffener.
The
stiffener comes in two parts.
![Stiff1.jpg](5x7PopupLightweightBlue_files/image013.jpg)
Join
the two halves and make sure the notches are facing up.
![Stiff2.jpg](5x7PopupLightweightBlue_files/image014.jpg)
![Stiff3.jpg](5x7PopupLightweightBlue_files/image015.jpg)
Attach
the notches to the spring in the screen and then use the wing nut to told the
stiffener in place.
![stiff4.jpg](5x7PopupLightweightBlue_files/image016.jpg)
The stiffener
will bow slightly that is what gives the fabric its extra stretch. If it bows
too much make sure that the two halves are all the way in the plastic sleeve.